Ashworth's Woven Wire Belts are great for food processing or industrial applications.
WG Woven Wire Conveyor Belts
Ashworth Straight Running Friction Driven Belts are woven wire belts that are drum, as opposed to sprocket, driven. Within this product grouping are a host of woven wire belts, ranging from the simplest, conventional weave designs, to the most complex, tightly-woven compound balance weave belts. Some of our most popular belts are individually featured below. However, construction possibilities for straight running, friction driven belts are practically endless, considering the number of different materials and weave patterns are available. Contact an Ashworth associate for assistance in selecting a straight running friction driven belt that is specifically tailored for your application.
NOTE: Our woven belts are measured for length under tension.
WG Woven Wire Conveyor Belts
Specifications
Options
Downloads
Specifications
Technical Specifications
| Technical Specifications | Unit | |
|---|---|---|
| Material | Stainless, carbon, and galvanized steels, high temperature alloys | |
| Minimum Width | in. (mm) | 1.60 (40.6) |
| Maximum Width | in. (mm) | 216.00 (5486.4) |
| Weight | Dependent on mesh count and wire gauge | |
| Allowable Tension | Dependent on mesh count and wire gauge | |
| Conveying Surface | Full belt width | |
| Opening Size (Based on mesh count) | 40-70% depending on mesh count and wire size | |
| Method of Drive | Friction driven on flat-faced drums or terminal rolls | |
| Maximum Temperature | °F (°C) | Up to 2012 (1100) dependent upon material |
Belt Calculator
No Results
Base Belt Weight
Working Strength
Opening Size
Open Area Surface
Open Area Thru
Estimated Thickness
Min Drum Diameter
Need more detailed information?
Need more detailed information?
Need more detailed information?
Options
Product Options
Balanced Weave
WG Balanced Weave belts are composed of right- and left-hand spirals joined by a connector rod. Edges are welded. The mesh choice for WG belts is nearly unlimited and is dependent upon requirements of the application, including product weight and support requirements, as well as process temperature.
Special Features
WG belts can be manufactured with flights (Figure A) or as positive drive edge belts (figure B). Standard chains are hollow pin, in 0.5"(12.7mm), 0.63"(15.9mm), or 1"(25.4mm) pitch.
Figure A.
Figure B.
Downloads
Downloads
Technical Bulletins
Conveyor System Review Form
